Fireshield® Steel 1001

Water-Borne 30 | 60 | 90 min protection :18 litre
Substrate | Steel
Fire Rating | 30 | 60 | 90 minute.
Type | Water-borne
Environmental | Declare + Red List Free

Fireshield® Steel 1001 is a waterborne, halogen-free, thin film intumescent coating with a matt white finish, designed for use on interior structural steel. Fireshield® Steel 1001 is optimised to achieve 30 and 60-minute FRR.


Fireshield® Steel 1001 (ArchitecturalWhite 4FR) is halogen-free and designed as a decorative, smooth, fibre-free finish for interior structural steel. These attributes make Steel 1001 easy to apply and wonderful to look at.

 

Steel 1001 is the only 30-90 minute intumescent available in New Zealand and Australia with the environmental accreditation from Declare.

 

 

Fireshield® Steel 1001 is fully compliant for use in New Zealand and Australia:

New Zealand:  Fire tested to EN13381-8:2013 and assessed by Exova Warringtonfire to BS476 parts 21 and 22 and 5th Edition Yellow Book using NZS 3404: Part 1, 1997 and complying with the New Zealand Building Code B1/VM1 and C2/AS1-C6/AS1 Section C5.1.1.

Australia: Fire tested to EN13381-8:2013 and assessed by Exova Warringtonfire to AS1530.4 using AS4100:1998 complying with the NCC 2019 Building code of Australia Volume 2, Schedule 5.  

1. Standard installation interior C1 zones:

  1. Fireshield® tested and approved primer.
  2. Fireshield® Steel 1001 (DFT varies depending on steel member Hp/a and FRR required)

 2. Installation with a pigmented topcoat:

  1. Fireshield® tested and approved primer.
  2. Fireshield® Steel 1001 (DFT varies depending on steel member Hp/a and FRR required)
  3. Fireshield® tested and approved topcoat/sealer.

 

Fireshield® Steel 1001 can be specified as a complete Fireshield system or combined with other manufacturers approved primers and topcoats.

For installations over existing coatings or installations in C2/C3 interior zones please contact us.


Specify and Order Fireshield® Steel 1001 Online