TIMBER SURFACE SOLUTIONS


TIMBER SUBSTRATE + FIRESHIELD = GROUP 1-S

Fireshield TimberClear 1FR is a waterborne, halogen free, intumescent coating system with a clear finish, designed for use on interior timber wall and ceiling surfaces. It is sealed with TimberClear Top Coat.

 

Available from Resene + find us on Masterspec section 6743RF.

  • Provides up to Group 1-S surface rating to timber based substrates.
  • Water-borne basecoat intumescent.
  • Cost-effective  two coat system basecoat + sealer
  • Fire tested in Europe and fully compliant with the NZBC for use in New Zealand.
  • Can be applied over tested stains to achieve any colour finish.
  • For internal use on timber wall and ceiling linings.
  • Clear finish to enhance the natural timber finish with Matt and Semi Gloss finishes.

FIRESHIELD TimberWhite 2FR is a waterborne, halogen free, intumescent coating with a matt white finish, designed for use on interior timber wall and ceiling surfaces.

 

Available from Resene + find us on Masterspec section 6743RF

  • Provides up to Group 1-S surface rating to timber based substrates.
  • Water-borne easy application.
  • Cost-effective one coat technology in internal dry spaces.
  • Fire tested in Europe and fully compliant with the NZBC for use in New Zealand.
  • Can be applied over Fireshield approved primers.
  • Achieve any colour finish using Fireshield approved top coats.
  • For internal use on timber wall and ceiling linings.

Fireshield Timber Whitewash is a waterborne, halogen free, intumescent coating with a whitewash finish, designed for use on interior timber wall and ceiling surfaces.

Available from Resene + find us on Masterspec section 6743RF

  • Provides up to Group 1-S surface rating to timber based substrates.
  • Water-borne easy application.
  • Cost-effective one coat technology in internal dry spaces.
  • Fire tested in Europe and fully compliant with the NZBC for use in New Zealand.
  • Can be applied over Fireshield approved clear primers.
  • Specifically designed for use on lighter timbers such as Pine.
  • For internal use on timber wall and ceiling linings.

One minute. That’s the difference between a serious accident and a catastrophe. These minutes are what drive us at Fireshield.

 

Our fire coating systems for steel and timber are simple to install and by preventing fire from spreading or even starting, save lives. Fireshield coatings are safety in a bucket.

 

With a complete range of products for the protection of structural steel + internal timber surfaces, we are proud to bring our New Zealand customers products from leading manufacturers around the globe with over 30 years experience in the passive fire coating market.

 

A

STRUCTURAL STEEL FIRE RATING SOLUTIONS


STRUCTURAL STEEL + FIRESHIELD = UP TO 1.5 HOURS FIRE PROTECTION

Fireshield Architectural White 4FR is a waterborne, halogen free, intumescent coating with a white finish, designed for use on interior structural steel for up to 90 minutes protection from fire. Not for use on exterior structural steel.

 

Available from Potters Interiors + find us on Masterspec section 6742PF.

  • Specifically designed as a decorative intumescent coating able to be left exposed.
  • Fire tested in Europe and fully compliant with the NZBC for use in New Zealand.
  • Cost effective thin film technology + lower labour costs.
  • Water-borne technology.
  • The only intumescent in NZ to have environmental status from Declare
  • A wide range of topcoats and primers tested for use in C1 – C3 Zones.
  • Estimation Service + technical back up + Fire Engineer on staff = peace of mind.

60 minute fire rated coating for internal structural steel.

AVAILABLE NOW! CONTACT FIRESHIELD FOR ANY ENQUIRIES

  • A wide range of topcoats and primers tested.
  • Fully certified for use in New Zealand.
  • Cost effective thin film technology + lower labour costs.
  • Single pack solvent technology.