TimberOne

Fire rated coating system for light coloured timbers.

Australia Specifications
for TimberOne Basecoat - Group 1/Group 1-S

Specifications will be loaded shortly
Substrate | Light Coloured Interior Timber
Surface Rating | Group 1-S / Aus Coming Soon
Substrate Thickness | > 8mm for Group ratings
Substrate Density | > 338kg/m³ for Group ratings

The Fireshield® TimberOne system provides a translucent finish designed to reduce the yellowing of light coloured timbers while highlighting the natural grain. It provides a certified Group 1-S fire rating on interior timber surfaces such as pine, CLT, birch and spruce panels, boards and battens.


The full Fireshield® TimberOne system is a is a fully waterborne intumescent coating system consisting of two products:
• TimberOne Intumescent Basecoat and:
• TimberOne Top Coat.
The full Fireshield® TimberOne system can be installed in dry interior building spaces with uncontrolled atmospheres up to C3 Interior (ISO 12944-2) zones and include the following :
• The constant relative humidity is >75% or
• When a wipeable surface is required.
The TimberOne Basecoat can be installed without the TimberOne Top coat in dry, heated interior building spaces with controlled, clean C1 atmospheres (ISO 12944-2) or when:
• The constant relative humidity is <75% or
• When a wipeable surface is not required.
Characteristics:
  • Simple two coat fully waterborne system: basecoat and top coat
  • Thin film technology, quality finish.
  • Environmentally friendly Green Star.
  • Simple on-site application.
  • Low odour, low VOC.

Advantages:
  • Applied to natural timber as thin as 8mm.
  • Specifically designed for light-coloured timbers such as pine and CLT,
  • Lessens the yellowing effect of light-coloured timbers.
  • Simple waterborne two-coat system.

 

At A Glance  
Type
Waterborne intumescent basecoat
Fire Protection
Group 1-S 
Volume Solids
63% by volume
TVOC                           
36 grams/litre
Environmental         
Zero Halogens
Install Location
Interior Dry Areas
   
 
Specifications:
Masterspec section 6743FS or contact Fireshield direct for assistance.

 

Compliance:
  • Group 1-S solution in New Zealand compliant with the New Zealand Building Code Clause 3.4(a) complying with C/AS2-C/AS6.
  • Coming soon to Australia.

 

For more details about installation, environmental conditions and timber substrates go to the Technical or Applicators Portal. Currently there is a 4-month lead time for this product.

 

Related Products:

 Click on the image to go to the page

 


Specify and Order TimberOne Online