Fireshield® TimberClear Top Coat Matt

Clear Sealer : 5 litre pails.

NZ Specifications
for Fireshield® TimberClear Top Coat Matt

Top Coat Technical Datasheet plus
Top Coat Safety Datasheet plus

Australia Specifications
for Fireshield® TimberClear Top Coat Matt

Top Coat Technical Datasheet plus
Top Coat Safety Datasheet plus
Substrate | Timber + TimberClear basecoat
Surface Rating | See TimberClear
Substrate Thickness | See TimberClear
Substrate Density | See TimberClear

Fireshield® TimberClear Top Coat Matt is a clear, Bio-Solvent based topcoat, designed for use over Fireshield TimberClear intumescent basecoat.


The Fireshield® Top Coat is the final coat and is specifically designed to be used as a sealer coat over Fireshield® TimberClear completing the full system. 

The Fireshield® TimberClear system offers a clear interior timber coating system that can provide:

  • Group 1-S solution in New Zealand fully compliant with the New Zealand Building Code Clause 3.4(a) complying with C/AS2-C/AS6.
  • Group 1 solution in Australia fully compliant with the National Construction Code 2019 Amendment 1, CP4 for Class 2-9 Buildings using Codemark CM-30071-Rev 3.

Sequence of required coatings for standard interior installation (C1 zone equivalent):

  1. Fireshield® TimberClear basecoat.
  2. Fireshield® TimberClear Top Coat Matt or Semi-gloss.

Sequence of required coatings using approved sealer/stain (C1 zone equivalent):

  1. Fireshield® tested and approved stain.
  2. Fireshield® TimberClear basecoat.
  3. Fireshield® TimberClear Top Coat Matt or Semi-gloss.

For installations over existing coatings, installations in C2/C3 interior zones please contact Fireshield directly.

For more details about installation, environmental conditions and timber substrates go to the Architects/Specifiers or Applicators Portal.


Specify and Order Fireshield® TimberClear Top Coat Matt Online