Fireshield Timber Coating Calculators

How much coating do I need for my project for Group Surface Ratings?

Use the calculators below to work out an estimate of the Fireshield timber coating you need to order. We will confirm the quantity when you order.

Timberclear Calculator

A clear intumescent coating system for interior timber surfaces. TimberClear must be used with Fireshield TimberClear Top Coat to complete the system, no other top coat can be used. Approved stains can be used under the TimberClear system. The film thicknesses below are the minimum required for Group 1-S compliance.

TimberWhite Quantity Calculator

A pigmented white intumescent coating for new interior timber surfaces or previously coated surfaces in good condition. TimberWhite can be used with a top coat to give any colour finish, note the DFT increases when top coated. The film thicknesses below are the minimum required for Group 1-S compliance.

TimberOne Quantity Calculator

Fireshield® TimberOne is a is a waterborne intumescent coating system with a translucent finish designed to reduce the yellowing of light coloured timbers while highlighting the natural grain. TimberOne can be installed without a top coat in dry internal spaces when relative humidity is less than 75% constantly or a wipeable surface is requried. The film thicknesses below are the minimum required for Group 1-S compliance.