Our Products

TIMBER SURFACE SOLUTIONS


TIMBER SUBSTRATE + FIRESHIELD = GROUP 1-S

Fireshield TimberClear 1FR is a halogen free, intumescent coating with a clear finish, designed for use on interior timber wall and ceiling surfaces. TimberClear 1FR must be sealed with TimberClear Top Coat available in Matt and Semi Gloss finish.

A

We have introduced our new plant based bio solvent based Top Coat for the TimberClear 1FR system, continuing our commitment to product development.

 A

 A

Substrate:                          Timber

Surface Rating:               Group 1-S

Substrate Thickness:   Minimum 8mm

Substrate Density:        >338 kg/m³

  A

TimberClear 1FR TimberClear Top Coat Downloads:

TimberClear Datasheet
New Top Coat Bio Solvent Datasheet
TimberClear MSDS
New Top Coat Bio Solvent MSDS-Matt
New Top Coat Bio Solvent MSDS-Semi Gloss
Application Instructions

The Technical Datasheets and MSDS for the old Fireshield TimberClear Top Coat can be found here, if you’re not sure which one you have please contact Fireshield on 0800 FIRESHIELD for assistance.

 A

  A

Old TimberClear Top Coat Downloads:

Top Coat Datasheet Solvent
Top Coat MSDS

FIRESHIELD TimberWhite 2FR is a waterborne, halogen free, intumescent coating with a matt white finish, designed for use on interior timber wall and ceiling surfaces.

 A

 A

Substrate:                          Timber

Surface Rating:               Group 1-S

Substrate Thickness:   Minimum 8mm

Substrate Density:        >338 kg/m³

  A

TimberWhite 2FR Downloads:

TimberWhite Datasheet
TimberWhite MSDS
Application Instructions

FIRESHIELD Timber Whitewash is a waterborne, halogen free, intumescent coating with a whitewash finish, designed for use on light coloured timber interior timber wall and ceiling surfaces.

 A

 A

Substrate:                          Timber

Surface Rating:               Group 1-S

Substrate Thickness:   Minimum 8mm

Substrate Density:        >338 kg/m³

  A

Timber Whitewash Downloads:

Timber Whitewash Datasheet
Timber Whitewash MSDS
Application Instructions

STRUCTURAL STEEL FIRE RATING SOLUTIONS


STRUCTURAL STEEL + FIRESHIELD = UP TO 1.5 HOURS FIRE PROTECTION

FIRESHIELD ArchitecturalWhite 4FR is a water-borne white intumescent optimised for 30 and 60 minute fire protection of interior structural steel but can offer up to 90 minutes protection.

 A

ArchitecturalWhite 4FR is halogen free and designed as a decorative, smooth fibre free finish. These attributes make ArchitecturalWhite 4FR easy to apply and wonderful to look at.

  A

FIRESHIELD ArchitecturalWhite 4FR is fully compliant for use in New Zealand, fire tested in Europe to EN13881-4:2013. Certification, compliance and classification by Warrington Fire in accordance with NZ3404:1997. Assessed to BS476:2009 and UK AFP Yellowbook 5th Edition gives complaince with the NZBC B1/VM1.

 A

ArchitecturalWhite 4FR Downloads:

ArchitecturalWhite 4FR Datasheet
ArchitecturalWhite 4FR MSDS
Approved Primers
Approved Top Coats
Application Instructions

FIRESHIELD SQ476 is a white single pack solvent  intumescent used to fire rate internal structural steel for up to 60 minutes.

 

FIRESHIELD SQ476 is fully compliant for use in New Zealand, fire tested in Europe to BS476:2009. Certification, compliance and classification by Warrington Fire in accordance with NZ3404:1997 and complies with the NZBC B1/VM1.

  A

Fireshield SQ476 Downloads:

Fireshield SQ476 Datasheet
Fireshield SQ476 MSDS
COMING SOON!