About our products

Fireshield TIMBERCLEAR1FR clear timber intumescent coating – achieves a Group 1 rating to internal timber surfaces down to 9mm thick to meet the requirements of the NCC with our Codemark Certificate of Conformity.

Fireshield TIMBERCLEAR1FR is a water-borne clear intumescent that gives you the highest surface group rating on any timber, Group 1. A two-coat system for interior use, one coat of Fireshield TIMBERCLEAR1FR sealed with one coat of Fireshield TOPcoat1FR, which is offered in flat (gloss 7%) or semi-flat (gloss 20%). Fireshield TIMBERCLEAR1FR gives you a smooth and clear finish.

Contact us or see our TimberClear Technical Data Sheet for timber lining requirements.

Detailed technical information for these products can be found here:

TIMBERCLEAR1FR Technical Data
TIMBERCLEAR1FR TOPcoat Technical Data

Material Safety Data Sheets to accompany each product can be found here:

TIMBERCLEAR1FR Safety Data Sheet
TIMBERCLEAR1FR TOPcoat Safety Data

TimberClear Codemark Certificate of Conformity :

TIMBERCLEAR1FR Codemark Certificate

Application instructions for this product can be found here:

TIMBERCLEAR1FR Application Instructions

Environmentally approved by

Fireshield TIMBERWHITE2FR intumescent coating for internal timber linings with a pigmented finish.

AVAILABLE SOON IN AUSTRALIA!

Fireshield TIMBERWHITE2FR is a water-borne, halogen free, white intumescent for interior use. Fireshield TIMBERWHITE2FR will give you Group 1 rating on internal timber linings. It can be top-coated with tested topcoats to achieve a particular colour. Fast one-coat application also means lower labour costs.

Environmentally approved by

Fireshield ArchitecturalWhite intumescent coating for structural steel fire protection.

ONLY AVAILABLE IN AUSTRALIA FROM FIRESHIELD COATINGS

Fireshield Architectural White is a thin film water-borne, decorative and fibre free white intumescent coating.

It is halogen free, competitively priced, gives an excellent surface finish, and is simple to apply by one of our Accredited Applicators.
Architectural White is fully certified and assessed to AS1530.4 for use in Australia for up to 90 minute protection.

Fireshield offers a free take off service, so send us your tender packages and we can assist in doing your loading schedules and calculating the quantities required.

Detailed technical information for this product can be found here:

STRUCTURAL4FR Technical Data Sheet

The Material Safety Data Sheet to accompany this product can be found here:

ArchitecturalWhite4FR Material Safety Data Sheet

Approved Primers and Top Coats for this product can be found here:

ArchitecturalWhite4FR Approved Primers
ArchitecturalWhite4FR Approved Top Coats

 

WHY DO I NEED FIRESHIELD PRODUCTS?
WHAT MAKES FIRESHIELD SO SPECIAL?
HOW DO I APPLY YOUR PRODUCTS?